|
|
|
|
|
|
|
|
| Current Category CURRENT SPECIALS
SPECIAL OFFERS
High Speed Steel (HSS) Turning Tool Kit 1
For HSS turning tools, including: gouges and turning cutters.
Kit includes: Gouge Tool SVD-185, Profile Honing Wheels LA-120, Black Silicon SB-250 grind stone.
The Black Silicon SB-250 stone (for Tormek T-7 and 2000 machines) is designed specifically for grinding HSS tools.
|
|
High Speed Steel (HSS) Turning Tool Kit 2
For HSS turning tools, including: gouges and turning cutters. With Diamond Truing Tool.
Kit includes: Gouge Tool SVD-185, Profile Honing Wheels LA-120, Black Silicon SB-250 grind stone, Diamond Truing Tool TT-50.
The Black Silicon SB-250 stone (for Tormek T-7 and 2000 machines) is designed specifically for grinding HSS tools.
This kit contains the Diamond Truing Tool, which is essential for initial and periodic dressing of the SB-250 stone. If you already have one of these, we have other kits on this page without this tool.
|
|
High Speed Steel (HSS) Turning Tool Kit 3
For HSS turning tools, including: gouges and turning cutters. With Diamond Truing Tool and Turning Tool Setter.
Kit includes: Gouge Tool SVD-185, Profile Honing Wheels LA-120, Black Silicon SB-250 grind stone, Diamond Truing Tool TT-50, Turning Tool Setter TTS-100.
The Black Silicon SB-250 stone (for Tormek T-7 and 2000 machines) is designed specifically for grinding HSS tools.
This kit contains the Diamond Truing Tool, which is essential for initial and periodic dressing of the SB-250 stone. If you already have one of these, we have other kits on this page without this tool.
|
|
High Speed Steel (HSS) Turning Tool Kit 4
For HSS turning tools, including: gouges, turning cutters, skew chisels, parting and beading tools, roughing gouges and straight carving gouges up to 50mm width. With Turning Tool Setter.
Kit includes: Gouge Tool SVD-185, Profile Honing Wheels LA-120, Multi-Jig SVS-50, Black Silicon SB-250 grind stone, Turning Tool Setter TTS-100.
The Black Silicon SB-250 stone (for Tormek T-7 and 2000 machines) is designed specifically for grinding HSS tools.
|
|
High Speed Steel (HSS) Turning Tool Kit 5
For HSS turning tools, including: gouges, turning cutters, skew chisels, parting and beading tools, roughing gouges and straight carving gouges up to 50mm width. With Diamond Truing Tool and Turning Tool Setter.
Kit includes: Gouge Tool SVD-185, Profile Honing Wheels LA-120, Multi-Jig SVS-50, Black Silicon SB-250 grind stone, Diamond Truing Tool TT-50, Turning Tool Setter TTS-100.
The Black Silicon SB-250 stone (for Tormek T-7 and 2000 machines) is designed specifically for grinding HSS tools.
This kit contains the Diamond Truing Tool, which is essential for initial and periodic dressing of the SB-250 stone. If you already have one of these, we have other kits on this page without this tool.
|
|
Precision Knife Sharpening Kit 1
For precision sharpening of knives.
Kit includes: Short Knife Jig SVM-45, Long Thin Knife Jig SVM-140, 4000 grit Japanese Waterstone SJ-250.
The Japanese Waterstone SJ-250 (for Tormek T-7, 2000 and 4000 machines) is designed specifically for extra-fine grinding and is excellent for obtaining the best edge on knives. So fine that you don't want to use the leather honing wheel after using the Japanese stone. The Japanese waterstone is 4000 grit. It is dressed with the Diamond Truing Tool TT-50, and is periodically cleaned (during use) with the Stone Grader SP-650. The SJ-250 is so fine, it will not grind out nicks or change edge angle, for this you need to use the standard grey SG-250 stone.
|
|
Precision Knife Sharpening Kit 2
For precision sharpening of knives. Includes Diamond Truing Tool.
Kit includes: Short Knife Jig SVM-45, Long Thin Knife Jig SVM-140, 4000 grit Japanese Waterstone SJ-250, Diamond Truing Tool TT-50.
The Japanese Waterstone SJ-250 (for Tormek T-7, 2000 and 4000 machines) is designed specifically for extra-fine grinding and is excellent for obtaining the best edge on knives. So fine that you don't want to use the leather honing wheel after using the Japanese stone. The Japanese waterstone is 4000 grit. It is dressed with the Diamond Truing Tool TT-50, and is periodically cleaned (during use) with the Stone Grader SP-650. The SJ-250 is so fine, it will not grind out nicks or change edge angle, for this you need to use the standard grey SG-250 stone.
This kit contains the Diamond Truing Tool, which is essential for initial and periodic dressing of the SJ-250 stone. If you already have one of these, we have other kits on this page without this tool.
|
|
|
|
|
|
|
|
|
|
