|
The new T-7 model improves the accuracy and safety in edge tool sharpening thanks to two new innovations, a Square Edge Jig and a Truing and Dressing Tool with screw feed. These developments also make the sharpening more user friendly.
Everything below is included in the new TORMEK T-7 package....
|
|
New Square Edge Jig (SE-76)
Conventional jigs on the market require that you align the tool in the jig with mounting screws which is time consuming and you lose the exact repeatability at each sharpening. The new Tormek Square Edge jig solves this problem and the chisel will be ground square, i.e. at 90 degrees, each time without any adjustments. This is achieved because the jig automatically aligns the chisel to its flat, machined face.
Another benefit is that the SE-76 can also clamp short and tapered tools firmly, e.g. Japanese chisels. The jig copes with blades up to 76 mm or 3" width.
The new Square Edge Jig SE-76 has safety stops, which prevent the tool from slipping off the stone, which can hurt your fingers.
|
|
Tormek Square Edge Jig.
|
Conventional jigs.
(Angle exaggerated for clarity.)
|
Safety stops (1)
prevent the tool from sliding off the grindstone and scrape your knuckles.
| |
|
Diamond Truing Tool (TT-50)
The other development is a Truing and Dressing Tool TT-50 with screw feed. This enables the user to keep the stone in perfect condition, which is essential for a perfectly sharpened edge.
- Truing and Dressing Tool with screw feed.
- Trues the grindstone exactly round and flat.
- Guided by the Universal Support, which also guides the jigs.
- Dual knobs for smooth feed across the stone.
|
|
Grading Stone (SP-650)
The fine side grades the stone for a 1000 grit finish. The coarse side of the grader reverses the stone to normal 220 grit fast grinding. Activates a glazed stone.
|
|
7 Year Warranty
A seven year warranty applies to all customers including industrial users. This is possible due to the improved coating of the housing, stainless steel main shaft and a powerful, industrial AC motor, which is designed for continuous operation.
|
Valid also for industrial use.
|
AngleMaster
Sets and measures the edge angle. Adjustable to any stone diameter from Ø 250 mm or 10" down to Ø 150 mm or 6". Measures from 10° to 75°. Magnets keeps it in place.
|
|
Honing Compound
For application on the leather honing wheels. Grain size
3 micron (average). Removes the burr and polishes the edge to a mirror finish.
|
|
|
Hardcover 155 page Handbook
The book explains the basics in edge tool sharpening such as grinding and sharpening, edge angle and bevel angle, dry grinding and wet grinding, vertical and horizontal grinders, hollow bevel, grinding direction, grinding pressure, tool rests and grinding jigs, honing and grinding technique for carving gouges and V tools.
The book also gives you useful hints and describes the unique Tormek method of grinding, sharpening and honing and how to work with it. More than 500 detailed line drawings show, step by step, how best to grind most type of edge tools.
|
|
Tormek DVD
Brings the Handbook instructions to life. 24 minute including a 4 minute introduction to the Tormek way of sharpening.
|
|
Other Standard Features Include
Stainless steel hardware
Prevents from rust and wear on bearings.
Universal Support with acme thread
Round section without flat machining makes it faster to change position.
Improved Horizontal Base
Double locking screws and tighter fit for highest precision.
Micro Adjust with scale
For a predetermined cutting depth when using the TT-50 Truing and Dressing Tool.
|
 
 
|
|
Contents
- T-7 Water Cooled Sharpening Machine
- SuperGrind Stone 250mm x 50mm,
- Leather Honing Wheel,
- Universal Support with micro adjustment, which can be placed either vertically in sleeves or horizontally in the base XB-100,
- SE-76 square edge jig,
- WM-200 Pro Angle Master
- TT-50 diamond truing tool,
- SP-650 grading stone
- PA-70 honing paste,
- HB-10 handbook,
- VID-4E DVD.
|
|
